Short answer: Interior demolition in Jacksonville is a gut-out or selective tear-out that leaves the building standing. Crews remove finishes, fixtures and often non-load-bearing walls so a kitchen, bathroom, house or commercial suite can be rebuilt. This is usually an alteration, tenant-build-out or change-of-use permit in JaxEPICS, not the City’s demolition-of-buildings permit used for a full teardown. The City’s published alteration fee starts at $3.00 in Building Inspection Division (BID) charges for each $1,000 of estimated cost, with a minimum BID fee of $112.50 or $33.75 per required inspection, whichever is greater, plus plan review, a construction-and-demolition debris fee and, when those trades are involved, separate electrical, plumbing and mechanical permits. If the work disturbs enough suspect material, or if load-supporting members come out, the City’s asbestos rules and a Florida Department of Environmental Protection notice can apply before anyone opens a wall. Published 2026 national guides put most smaller interior jobs between about $1,097 and $5,054, with Angi listing a $3,046 average to gut a house and $800 averages to demo a kitchen or a bathroom.
This guide covers interior demolition in Jacksonville in the order the decisions usually come up: what the job involves, when a City building permit and asbestos or historic review apply, what published cost guides and the City fee schedule say, where the debris can go and what to ask in a quote. It is not a full-house teardown guide; that path, including the demolition permit fee formula and the seven-day grassing letter, is in our Jacksonville house demolition permit, asbestos and cost guide. Arwood Site Services of Jacksonville handles interior demolition for homeowners, investors and commercial tenants, and can include a roll-off container as part of the job.
What does interior demolition involve in Jacksonville?
Interior demolition is the controlled removal of what is inside a building so the structure can stay in use. A typical job strips rooms down toward the studs: drywall or plaster, ceilings, flooring, cabinets, counters, tubs, toilets, appliances and, when the new layout requires it, partition walls. The roof, exterior walls and foundation stay. That is the difference between a gut and a teardown, and it is why the City usually reviews this work as an alteration rather than as the demolition of a building.
In Jacksonville the work shows up in a few recurring forms:
- Kitchen and bathroom guts in existing houses, including older homes in neighborhoods such as Riverside, Avondale, Springfield and San Marco, where plaster, layered flooring and dated plumbing are common.
- Whole-house interior renovations for a flip, a flood repair or a layout change, where most rooms are opened up but the building remains.
- Commercial tenant improvements in offices, restaurants and retail suites downtown, along the Southbank or in older storefronts, often tied to a change of use and a new life-safety plan.
- Selective demolition, such as taking out one non-load-bearing wall, a bank of cabinets or a single floor finish, while protecting the rest of the occupied space.
The physical tear-out is only part of the job. Before walls come down, someone has to confirm whether a wall carries load, whether plumbing or wiring runs through it, whether suspect asbestos-containing materials will be disturbed and whether a City, beach-city or historic review applies. After the tear-out, the debris has to leave the site in a legal container and go to a permitted facility. A kitchen or bathroom gut often fits in a 10- or 20-yard roll-off if the box can sit on the driveway; sizing, weight limits and right-of-way placement rules are covered in our Jacksonville roll-off dumpster permit and cost guide.
Load-bearing walls change both the method and the paperwork. Removing a partition is a different job from removing a wall that holds up a floor or roof. The City’s asbestos requirements treat the removal of load-supporting members as demolition, not as a simple renovation, which can trigger a demolition notice to the Florida Department of Environmental Protection even when no asbestos is found. That is a reason to have the structure checked before anyone swings a hammer.
Do I need a City of Jacksonville permit for interior demolition?
Often yes, if the work is an alteration, a repair of regulated systems or a change in how the space is used. The Building Inspection Division’s FAQ says a building permit is required for any construction that physically changes or adds structures, or for work regulated by local codes, and it lists alterations, repairs such as rewiring or plumbing-fixture work, demolishing a building and a change of use among the examples (City of Jacksonville, Building Inspection Division FAQs). The same page cites the standard in Florida Building Code Section 105.1: a permit is required to construct, enlarge, alter, repair, move, demolish or change the occupancy of a building, or to install, alter, repair, remove, convert or replace electrical, gas, mechanical or plumbing systems regulated by the technical codes. The City is currently enforcing the Florida Building Code 8th Edition (2023).
The City’s published list of work that does not require a permit is short. It includes patio slabs, replacement of plumbing fixtures after the stop (excluding water heaters), stopping leaks, clearing drain stoppages that do not rearrange piping, and a handful of portable or internal mechanical exceptions. A kitchen or bathroom gut, new wiring, relocated plumbing or the removal of walls is not on that list. The residential permitting page also notes that the City does not inspect cosmetic items such as paint, wallpaper, carpet and interior door hardware. If your scope is only those finishes, ask the Building Inspection Division before you assume a permit is unnecessary. If the scope includes structural, electrical, plumbing or mechanical work, plan on a permit.
A few local details matter on the application:
- File in JaxEPICS. Online submission is required for all permit types. In addition to the application, the applicant uploads a completed Permission to Obtain Permits form, and documents must be in PDF format. The email entered as the project contact is the address that receives review notices. Plan-review time does not start until Zoning, Concurrency and Development Services have approved the plans for review and the plan-review fee has been paid (City of Jacksonville, Online Permit Submission).
- Agency reviews can sit in front of the building review. Depending on the scope and the address, the City may require reviews such as asbestos, historic preservation, the Downtown Investment Authority, FEMA or flood, or an Arlington CRA review. Those reviews have to finish before the Building Inspection Division begins its review.
- A change of use is its own path. If a commercial suite will be used as a different occupancy than the one on file, the City requires a converting-use building permit and, at a minimum, a life-safety plan and code summary from a Florida-licensed design professional. That review can lead to changes such as additional exits, restrooms, or fire-sprinkler or alarm work.
- Larger or structural jobs need a design professional. Under Chapter 320 of the Ordinance Code, as summarized on the City’s commercial permitting page, plans for alterations, repairs or improvements costing $25,000 or more must be prepared and approved by a Florida-registered architect or professional engineer. If the work involves structural design, those drawings are required in any case.
- A Notice of Commencement is required on most jobs over $5,000. Permits, once issued, are good for 180 days.
This alteration path is not the same as the City’s demolition-of-buildings permit. That permit, and its fee of $37.50 plus $12.50 plus a $400 construction-and-demolition debris charge per 1,000 square feet of floor area for a single-family residential building zoned residential, is the one used when the building itself is coming down. Do not budget a teardown fee for a gut-out, and do not skip an alteration permit because you already read the house-demolition guide.
A City of Jacksonville building permit does not cover every address in Duval County. Jacksonville Beach, Atlantic Beach, Neptune Beach and Baldwin issue their own building approvals. Confirm the building department that has jurisdiction at the property before you apply.
What does the City charge for an interior demolition or alteration permit?
For alterations, tenant build-outs and converting use, including major repair to buildings or other structures, Section 320.409(6) of the City Fees schedule sets the Building Inspection Division permit fee at $3.00 for each $1,000 of estimated cost or fractional part thereof, plus a $0.65 resource-management fee, a landscape fee equal to 12 percent of the BID permit fee, a $1.00 Development Services fee and a $0.90 construction-and-demolition debris fee, each also tied to that $1,000 increment. The minimum BID permit fee is $112.50 or $33.75 per required inspection, whichever is greater. The plan-review fee is 67 percent of the BID permit fee or $75.00, whichever is greater. For a converting-use permit where no inspections are required, the BID permit fee is $80.00 (City of Jacksonville, City Fees, Section 320.409).
A separate plans-examining fee under Section 123.102 lists alterations, tenant build-out and converting use at $2.00 per $1,000 of cost. Electrical, plumbing and mechanical work, when part of the project, have their own permit fees on the same schedule. Those trade permits are in addition to the building alteration permit, not a substitute for it.
On a modest single-room gut, the minimum BID fee and the minimum plan-review fee often matter more than the per-$1,000 rates. On a large commercial tenant build-out, the estimated construction cost is the number that moves the total. The figures above are the City’s published rates, not a quote, and they can sit alongside dumpster, abatement and contractor costs. Confirm the current fee for your estimated cost and inspection count before you budget.
Do historic districts or landmarks change an interior job?
Interior work that does not affect the exterior of the structure does not require a Certificate of Appropriateness (COA). If the same job changes windows, exterior doors or other exterior features such as a chimney, a COA is required before that work begins (City of Jacksonville, Historic Preservation FAQ).
A COA application is required for properties in the City’s locally designated historic districts and for locally designated landmarks when the work is on the exterior, including repairs to windows and siding and site work such as fencing, driveways and sheds. Once approved, a COA is valid for one year, and after work has begun it is valid for five years. Applications go through the City’s LUZAP portal. You can check an address or real-estate number on the City’s Land Development Map by turning on the Local Historic Districts and Local Landmarks layers. Starting exterior work without a required COA can lead to a violation, including after-the-fact review, corrective work or, in some cases, a hearing before the Jacksonville Historic Preservation Commission.
In practical terms, a kitchen or bathroom gut that stays inside the walls is typically a building-permit job, even in an older contributing house. Opening a new window, changing an exterior door or touching a chimney as part of that same remodel puts historic review back on the critical path. Get that answer from the map and, if needed, from Historic Preservation staff before demolition is scheduled.
When do asbestos rules apply to an interior demolition?
The City’s Asbestos Requirements form, revised March 2026, applies to any facility, institute, or commercial, industrial or public building, regardless of age, and the requirements have to be met before work starts (City of Jacksonville, Asbestos Requirements).
For renovation, the form applies when the work will disturb more than 160 square feet, 260 linear feet or 35 cubic feet of suspect material. In that case, a licensed asbestos consultant must complete a survey and the survey must be kept on site; regulated asbestos-containing material (RACM) must be removed by a licensed asbestos contractor before the renovation; Category I and Category II asbestos-containing material must also be abated if the methods would crumble, pulverize or reduce it to particles; and a Florida Department of Environmental Protection notice must be submitted at least ten working days before the asbestos removal. An asbestos-removal notice is not required if the survey finds no asbestos-containing material. Notices are submitted electronically through the DEP Business Portal at fldepportal.com/go.
For demolition, including full and partial demolition and the removal of load-supporting members, a survey is required and must be kept on site, RACM must be abated before demolition, and a Florida DEP notice of demolition is required regardless of whether asbestos is present. If no asbestos-containing material is found, the asbestos-removal notice is not required, but the demolition notice still is, and it still has to go in at least ten working days before the work.
The form lists common suspect materials that show up on interior jobs: pipe and duct insulation, fireproofing, drywall joint compound, plasters and textured ceilings, textured paints, floor and ceiling tiles, mastics, electrical insulation and others. A project may be exempt if the materials being disturbed are below the threshold amounts, or if the building is a residential structure with four or fewer apartments. The exemption does not apply to a home or building that is, or was, used for business; to multiple residential properties modified as part of a major construction, urban renewal or development project; to more than one residential building in a subdivision under the same owner or operator; or to a residential home associated with a facility or included in a group of buildings at a single demolition site under the same owner’s control.
Those are regulatory thresholds, not a medical clearance. If there is any doubt about flooring, joint compound or textured ceilings in an older Jacksonville building, get the survey before the gut starts. Asbestos, when it has to be removed, is not everyday dumpster debris. The City Fees schedule lists manifested asbestos at $282.48 per ton. Arwood Site Services of Jacksonville does not present itself here as the abatement contractor; that work belongs to a licensed asbestos contractor when the rules require it.
What does interior demolition cost? Published 2026 ranges
There is no single Jacksonville average published by a neutral source, so the figures below are national guide ranges, not Arwood Site Services quotes. They are a starting point for a budget. Local permit fees, asbestos findings, access in a tight older house or an occupied commercial suite, and disposal weight all move the final number.
| Item | Published range | Source |
|---|---|---|
| Gut a house, national average | $3,046; most homeowners $1,097–$5,054 | Angi (updated Sep. 28, 2026) |
| Gut a house, per square foot | $2–$8 (Angi); $2–$7 (HomeAdvisor); $2–$10 (Fixr) | Angi; HomeAdvisor (updated June 17, 2026); Fixr (updated Jan. 31, 2025) |
| 1,500-square-foot house, at Angi’s per-square-foot band | $3,000–$12,000 | Angi |
| Whole-house interior project, broader ranges | $5,000–$20,000 (Angi room table); $2,500–$9,800 (HomeAdvisor gut); $2,000–$20,000 (Fixr gut to the studs) | Angi; HomeAdvisor; Fixr |
| Smaller interior demolition projects | $1,097–$5,054; overall interior jobs also listed at $2,000–$20,000 | HomeAdvisor |
| Interior demolition, national average (Fixr) | $2,500 average for about 500 square feet; typical range $1,000–$5,000 | Fixr |
| Kitchen demolition | Average $800; most $300–$3,000; also listed $500–$3,000 | Angi (updated Oct. 16, 2026); HomeAdvisor; Fixr |
| Kitchen demolition, per square foot | $5–$12 (Angi; high end of a gut listed up to $20) | Angi |
| Kitchen by size (Angi) | 100 sf $500–$1,200; 161 sf $800–$2,000; 238 sf $1,200–$2,800 | Angi |
| Bathroom demolition | Average $800; most $300–$3,500 (Angi); $1,000–$2,300 (HomeAdvisor); $550–$1,500 (Fixr); Angi room table also lists $500–$2,300 | Angi (updated Sep. 19, 2026); HomeAdvisor; Fixr |
| Bathroom demolition, per square foot | $8–$20 (Angi; a full gut listed as high as $60); $15–$60 for a gut to the studs (HomeAdvisor) | Angi; HomeAdvisor |
| Bathroom by size (Angi) | 40 sf $320–$800; 96 sf $770–$1,920; 160 sf $1,280–$3,200 | Angi |
| Bedroom / living room | Bedroom $275–$1,100 (Angi) or $500–$1,200 (HomeAdvisor); living room $450–$1,750 | Angi; HomeAdvisor |
| Non-load-bearing wall | $300–$1,000 | Angi; HomeAdvisor |
| Load-bearing wall | $1,200–$10,000 | Angi |
| Commercial interior demolition | $4–$8 per square foot, or $40,000–$80,000 for 10,000 square feet | HomeAdvisor |
| Labor | $40–$80 per hour (Angi gut guide); $40–$45 per hour per worker (HomeAdvisor); $50–$100 per hour (Angi kitchen and bath guides) | Angi; HomeAdvisor |
| Dumpster rental | About $300–$500 per week (Angi gut guide); $200–$800 per week (Angi bath guide); $200–$550 per week (Fixr) | Angi; Fixr |
| Building permits, national guide ranges | $50–$500 (Angi kitchen and bath); $500–$2,000 (Angi whole-house gut) | Angi |
| City of Jacksonville alteration permit (local fee schedule) | BID $3.00 per $1,000 of estimated cost; minimum BID $112.50 or $33.75 per required inspection, whichever is greater; plan review 67% of BID or $75, whichever is greater; plus resource, landscape, Development Services and C&D fees | City Fees, Section 320.409(6) |
| City plans-examining fee for alterations / tenant build-out / converting use | $2.00 per $1,000 of cost | City Fees, Section 123.102 |
| Asbestos removal, published guide ranges | Average $2,100 (Angi gut guide); $5–$20 per square foot indoors (Angi kitchen and bath); $1,200–$3,000 (HomeAdvisor); $3–$120 per square foot (Fixr) | Angi; HomeAdvisor; Fixr |
| City manifested-asbestos disposal rate | $282.48 per ton | City Fees, Section 380.303 |
| Deconstruction instead of standard demo | $7–$14 per square foot (Angi); $5–$14 per square foot (HomeAdvisor) | Angi; HomeAdvisor |
The guides do not agree on a single “average” price, and Angi’s own figures do not all land in one band. Its September 2026 gut-house article lists a $3,046 national average and a most-homeowners range of $1,097 to $5,054, then a $2 to $8 per-square-foot band that puts a 1,500-square-foot house at $3,000 to $12,000, and a room table that lists a whole-house project at $5,000 to $20,000. HomeAdvisor’s June 2026 interior-demolition guide uses $2 to $7 per square foot and a $2,500 to $9,800 range to gut a house. Fixr, last updated January 31, 2025, is older and often lower on bathrooms. Read any one number as a rough band, and treat Jacksonville jobs with heavy tile, plaster, tight access or asbestos as more likely to sit toward the upper end.
What changes a Jacksonville quote most is usually the same short list: the rooms involved; whether walls are load-bearing; the mix of drywall, plaster, tile, flooring and fixtures; whether an asbestos survey and abatement are required; whether the job is a change of use or only a finish tear-out; how the debris will be loaded and hauled; and whether the work is in an occupied house or an empty suite.
Where does the interior debris go, and what are the City’s disposal rules?
The city’s landfill is Trail Ridge Landfill, at 5110 U.S. Hwy 301 S in Baldwin, about four and a half miles south of I-10. The City lists hours as Monday through Friday, 6 a.m. to 7 p.m., Saturday 6 a.m. to 1 p.m., and Sunday closed. The Disposal Operations page lists weekday regular waste, described as household garbage and building materials, at $30.30 per ton. The City Fees schedule, Section 380.303, publishes a separate construction-and-demolition rate at disposal facilities with scales: $22.71 per ton for C&D debris generated inside the city, and $30.30 per ton for C&D debris generated outside the city. Those two City pages do not use the same label for every load, so confirm which published rate applies to your material before you budget a self-haul (City of Jacksonville, Disposal Operations).
A rental price from a hauler is not the same as the City’s gate rate. Many companies fold disposal into the container price, then bill an overage if the load is heavier than the included weight. Interior jobs are often bulky (drywall, cabinets, trim) rather than as heavy as a concrete breakout, but tile, masonry and wet plaster can still push a smaller box over its weight limit.
What cannot go in a regular demolition dumpster matters as much as the tipping fee:
- Hazardous waste is prohibited in ordinary waste streams. Municipal Code Section 380.209 makes it unlawful to place hazardous waste of any kind in the residential collection waste streams. The City’s Household Hazardous Waste Facility, at 2675 Commonwealth Avenue, accepts household hazardous waste, appliances and large electronics. Hours listed by the City are Tuesday through Saturday, 8 a.m. to 5 p.m., closed Sunday and Monday. Items the City lists include paint, thinners, strippers, pool chemicals, pesticides, fuels, propane tanks, batteries, fluorescent bulbs, antifreeze and similar products. Those do not belong in a roll-off (City of Jacksonville, Household Hazardous Wastes).
- Asbestos is a separate stream when a survey or abatement applies, billed at the City’s manifested-asbestos rate rather than as mixed C&D.
- Clean material can often be recycled. Florida defines clean debris to include uncontaminated concrete and allows clean debris to be used as fill or raw material (Florida Administrative Code 62-701.200 and 62-701.730). Metal, clean wood and some fixtures can often be pulled out of a mixed interior load. Material bonded to asbestos-containing material stays out of that recycling stream.
Arwood Site Services of Jacksonville recycles concrete, brick, metal and wood where the material allows, instead of sending a mixed load to a landfill when it does not have to. If the roll-off has to sit in a City street, sidewalk, swale or easement rather than on the driveway, a Right-of-Way permit under Section 744.110 applies; the dumpster guide linked above covers those fees and rules.
What are the steps for an interior demolition in Jacksonville?
- Define the scope. List the rooms, whether the job is a selective tear-out or a gut to the studs, and whether any wall might be load-bearing. Photos, a floor plan and access notes (stairs, tight lots, occupied neighbors or an active business next door) help more than a guess at square footage.
- Check asbestos and, if the address is designated, historic status. Use the City’s threshold and exemption tests, and get a licensed survey when renovation or demolition rules call for one. Look up the address on the Land Development Map before you assume a COA is or is not required.
- Line up the permits. A bonded, registered contractor applies in JaxEPICS for the alteration, tenant-build-out or converting-use permit, plus electrical, plumbing and mechanical permits when those systems are part of the work. File a Notice of Commencement when the job is over $5,000. If load-supporting members are coming out, treat the Florida DEP demolition-notice clock as part of this step, not as an afterthought.
- Wait out required notices. When a Florida DEP asbestos-removal or demolition notice applies, it must be in at least ten working days before that work starts. Do not schedule the tear-out inside that window.
- Protect the rest of the building and isolate utilities. Seal off adjacent rooms, confirm what will stay, and have water, power, gas and low-voltage lines in the work area shut off or rerouted by the appropriate trade before walls open.
- Place the dumpster and start the tear-out. Prefer a flat, hard surface on private property. Load below the fill line, keep prohibited items out and sort recyclable metal, wood or clean masonry when the material allows.
- Leave the space ready for the remodel, and close out the permit. A written demolition scope should say what will still be in place (studs, subfloor, tub drain, electrical boxes) and who is responsible for inspections. Check the final invoice against disposal, permit and any abatement costs that were supposed to be included.
How can you keep an interior demolition on budget?
- Decide early whether you need a full gut or a selective tear-out. Angi and HomeAdvisor both note that removing everything down to the studs costs more than taking out only the finishes that have to go.
- Get a structural answer on any wall before you price the job. A non-load-bearing partition and a load-bearing wall are not the same line item, and the second one can also change the permit path.
- Empty personal items, paint, chemicals and appliances that do not belong in a construction dumpster before the crew arrives. Take household hazardous waste to the City facility at 2675 Commonwealth Avenue.
- Set the container on the driveway when the site allows, so you are not adding a City right-of-way permit to a short rental.
- Ask for an itemized quote that states the rooms included, whether load-bearing work is in the price, who pulls the permits, whether a dumpster and disposal are included, and how asbestos, if found, will be handled.
- If a driveway, pool or the building itself may come out later, say so up front. Bundling related work can save a second mobilization. The house-demolition and driveway guides linked above cover those jobs.
Frequently asked questions
Is interior demolition the same as demolishing the house?
No. Interior demolition removes finishes, fixtures and often walls so the building can be renovated. A house demolition takes the structure down and is permitted, and priced, as a teardown. Published 2026 guides put a full teardown higher than a gut; Angi lists house demolition at $6,000 to $25,000, or $4 to $17 per square foot, compared with $2 to $8 per square foot to gut the interior.
Do I need a building permit to gut a kitchen or bathroom in Jacksonville?
Plan on a permit if the work is an alteration or if it involves electrical, plumbing, mechanical or structural changes. The City’s published exceptions are narrow and do not list a kitchen or bathroom gut. Cosmetic-only work such as paint or carpet may fall outside what the City inspects, but you should confirm the exact scope with the Building Inspection Division before starting.
How much is the City permit?
For alterations, tenant build-outs and converting use, the City charges a BID fee of $3.00 per $1,000 of estimated cost, with a minimum of $112.50 or $33.75 per required inspection, whichever is greater, plus plan review (67 percent of the BID fee or $75, whichever is greater), resource-management, landscape, Development Services and construction-and-demolition debris fees, and a $2.00-per-$1,000 plans-examining fee. Electrical, plumbing and mechanical permits, when needed, are extra. Those are published City rates, not a contractor’s quote.
How much does interior demolition cost?
Published 2026 guides put most smaller projects between about $1,097 and $5,054, with Angi listing a $3,046 average to gut a house, an $800 average to demo a kitchen and an $800 average to demo a bathroom. Per-square-foot bands are commonly $2 to $8 for a general interior gut, $5 to $12 for a kitchen and $8 to $20 for a bathroom. Those figures are national guide ranges, not a Jacksonville quote.
Do I need an asbestos survey before a gut-out?
You need a survey, kept on site, when the City’s renovation thresholds are met (more than 160 square feet, 260 linear feet or 35 cubic feet of suspect material) or when the work is a demolition, including the removal of load-supporting members. Some one- to four-unit residential buildings may be exempt, but homes used for business and several other situations are not. When a demolition notice is required, it must be filed with the Florida DEP at least ten working days before the work, even if the survey finds no asbestos.
Does a historic house in Springfield or Riverside need a COA to gut the kitchen?
Interior work that does not affect the exterior does not require a Certificate of Appropriateness. If the remodel changes windows, exterior doors or a chimney, a COA is required before that work begins. Confirm whether the property is in a locally designated historic district or is a landmark on the City’s Land Development Map.
What size dumpster do I need for a kitchen or bathroom gut?
A bathroom or tight kitchen often fits a 10-yard container. A larger kitchen or a multi-room interior remodel is more often a 15- or 20-yard box. Weight limits matter if the load is mostly tile or masonry. See the roll-off guide linked above for sizes, City right-of-way rules and published rental ranges.
Can I do the demolition myself?
The published guides describe interior demolition as a poor fit for an inexperienced DIY job, especially where plumbing, wiring, load-bearing walls or asbestos may be involved. If a licensed survey or abatement is required, that portion is not a do-it-yourself task. Permit responsibility still sits with the person who pulls the permit.
Do Jacksonville Beach or the other beach cities use the same permit?
No. A City of Jacksonville building permit covers addresses under the City’s Building Inspection Division. Jacksonville Beach, Atlantic Beach, Neptune Beach and Baldwin have their own building departments. Check the agency that has jurisdiction at your address.
Get a free interior demolition quote in Jacksonville
Planning a kitchen or bathroom gut, a whole-house interior renovation or a commercial tenant build-out? Arwood Site Services of Jacksonville will help you define the scope, confirm whether City permits and asbestos notices apply and give you a written quote.
- Call (904) 305-7534
- Email [email protected]
- Request online: Get a Quote
You can also follow Dependable Demolition on Facebook and LinkedIn for job updates and service news.
Learn more on our Building Demolition and demolition services pages, or start with the house demolition and roll-off dumpster guides if your project may go beyond an interior gut.
Sources
- City of Jacksonville, Building Inspection Division FAQs
- City of Jacksonville, Online Permit Submission
- City of Jacksonville, Residential Permits (Florida Building Code Section 105.1 quotation; cosmetic items the City does not inspect)
- City of Jacksonville, Commercial Permitting (Chapter 320 design-professional threshold)
- City of Jacksonville, City Fees (Section 320.409(6) alterations, tenant build-out and converting use; Section 123.102 plans-examining fees; Section 320.409(12) demolition of buildings; Section 380.303 disposal rates)
- JaxEPICS
- City of Jacksonville, Asbestos Requirements (March 2026)
- Florida Department of Environmental Protection, Asbestos FAQ
- Florida Department of Environmental Protection, Notice of Renovation or Demolition
- City of Jacksonville, Historic Preservation FAQ
- City of Jacksonville, Certificate of Appropriateness Process
- City of Jacksonville, Disposal Operations (Trail Ridge Landfill)
- City of Jacksonville, Household Hazardous Wastes
- Angi, How Much Does It Cost to Gut a House? [2026 Data], updated Sep. 28, 2026
- Angi, How Much Does It Cost to Demo a Kitchen? [2026 Data], updated Oct. 16, 2026
- Angi, How Much Does It Cost to Demo a Bathroom? [2026 Data], updated Sep. 19, 2026
- HomeAdvisor, How Much Does it Cost to Demo an Interior?, updated June 17, 2026
- Fixr, Interior Demolition Cost, updated January 31, 2025
- Fla. Admin. Code R. 62-701.200 and R. 62-701.730
Cost figures are published national guide ranges from the sources above, checked November 15, 2026. They are not quotes from Arwood Site Services. Permit fees, asbestos rules and disposal rates were taken from City of Jacksonville and Florida DEP documents the same day; confirm current rules, fees and accepted materials for your address before work is scheduled.





